At last! With handles made from scrap rosewood smuggled back from a Costa Rican surf trip, the mirror box is easily mounted and ready to use. Its dimensions are: 43" wide, 42" tall, and 11" deep.
To see the progress of this project from the beginning, scroll back a mere 28 posts.

With the finishing complete, it's time for final assembly. Here I'm attaching the box frame within the notches of the runners. Later, the curvy supports that go below the box frame will attach to the frame and runners. The hook bar will then attach to the supports. Finally the mirror is attached to the runners as well.

Finally, the moment of swears or satisfaction. Dry fitting (without glue) tells the tale of how accurate I have or haven't been. So far so good!

Transferring the cut lines from tails to pins is just a matter of drawing a thin line around the perimeter. This simple step requires focus: any imperfection here will be glaringly obvious when the piece comes together.

Some things are best done by hand: cleaning up the tails with chisels.

Portions of the piece that call for wide boards require careful glue-ups of thinner boards.